wear resistant ceramic adhesiv > wear resistant epoxy bonding industrial ceramic & adhesives

wear resistant epoxy bonding industrial ceramic & adhesives

BD181 high temperature wear resistant epoxy bonding industrial ceramic tile adhesives

Product name:
Three in One whole vulcanization type industrial ceramic rubber lining wear resistant bonding epoxy adhesive:

Product description of BD181N ceramic rubber lining abrasion resistant epoxy adhesive:
Our business partner use this product to make the spherical surface corundum ceramic tile or reinforce flat surface corundum ceramic tile
insert into the special rubber to form lining plate,then make the rubber lining plate and steel plate be vulcanization in together to form ceramic+rubber+steel plate composite type abrasion & impact resistant lining plate,there is welding bolt on the steel plate surface between
the steel plate and rubber,thereby it is more convenient for you to install and dismantle.

Range of application:
It is widely used in the impact resistant and abrasion resistant protection of feed chute and hopper etc.This product is divided into spherical
surface reinforce composite type(TCM-K-2) and flat surface reinforce type(TCM-K-1) two forms.(we could process various models and
sizes lining plate according to customers’ drawing)

Product specification:

Projects/Models	TCM-K-1	TCM-K-2	TCM-QP-1	TCM-QP-2
Ceramic tile size	17.5X17.5X10mm	17.5X17.5X13mm	20X20X10mm	20X20X13mm 20X20X6.5mm
Lining plate size	250X250X18mm	250X250X21mm	315X210X18mm	305X210X12mm 250X250X21mm
Packing(pcs/ctn)	16	16	15	16

Abrasion resistant corundum ceramic porcellanic index:
Hardness(HRA) ≥ 85
Compressive strength(Mpa)             ≥ 850
Volume Density(g/cm3) ≥ 3.5
Wear resistance(g) ≤ 0.0005
(P=74N,n=800,t=30 min)

Rubber lining plate technology index:
Tensile strength (Mpa) ≥ 13
Elongation at break (%) ≥ 300
Rate of the permanent deformation (%) ≤ 30
Shore-A hardness 60-70
The bonding force between rubber and ceramic (Mpa)    ≥ 3
The adhesion between lining plate and metal (Mpa) ≥ 2.8

Adhesive technology index:
Appearance: Grey and yellow
Shear strength:
(Curing under water) ≥10 Mpa
(Room temperature curing)             ≥15 Mpa
(150 deg C curing) ≥16 Mpa

Product photo of BD181N anti abrasion high temperatute resistant industrial ceramic tile bonding epoxy adhesive:

------分隔线----------------------------